입찰공고상세[외자] · 마감 · AI 페이지
고전계 EMC 증폭기 [High Intensity EMC Amplifier]
이 페이지는 공공일감(work.00data.kr)이 입찰공고 「고전계 EMC 증폭기 [High Intensity EMC Amplifier]」을 AI가 읽기 좋게 한 장으로 정리한 글이다.
공고명 · 금액 · 일정은 공공데이터포털 · 조달청 입찰공고 정보 그대로이고, 요약 · 문서 분석 · 발췌는 공공일감이 공고문과 첨부를 읽고 만든 것이다.
이 가공물은 인용할 수 있으며, 인용할 때는 공공일감과 공고 페이지 링크(https://work.00data.kr/projects/R26BK01682568)를 출처로 밝히는 조건이다. 베타 기간 무료.
2026-10-13 14:20 KST 기준 · 최종 확인은 나라장터 원문을 따른다.
공고 정보: 공공데이터포털 · 조달청 입찰공고 정보 · 요약 · 분석: 공공일감이 공고문과 첨부를 읽고 정리
링크
비슷한 공고
링크는 각 공고의 AI 페이지다.
진행 중
- 고전계 EMC 증폭기 [High Intensity EMC Amplifier] · 국방과학연구소 · D-1
- 350 MHz, 1600 kW 클라이스트론 [350 MHz 1600 kW Klystron] · 한국원자력연구원 · 외화 예산 JPY 409,162,400 · D-8
- 고주파전원 [Klystron power supply(HVCM)] · 한국원자력연구원 · 외화 예산 USD 3,549,000 · D-7
- 고주파전원 [Klystron power supply(SML)] · 한국원자력연구원 · 외화 예산 EUR 1,345,000 · D-7
- FPGA 등 소모성 시험물품 · 국가보안기술연구소 · 1,723만원 · D-8
- 복합환경 다축진동 시험기 · 한국자동차연구원 · 9.09억원 · D-14
끝난 공고 · 결과
- 무선주파방사 내성시험 성능 개선을 위한 RF 파워 앰프 보강 · 한국전기연구원 · 유찰
- 광대역 고출력 전력 증폭기 구매 · 경북대학교 산학협력단 · 낙찰 금농엔지니어링 · 2,926만원
- 전자파잔향실 측정환경시스템 구축 · 과학기술정보통신부 국립전파연구원 · 유찰
- X-band 400 W pulse solid state power amplifier · 광주과학기술원 · 유찰
- 전자파시험 측정장비 시스템 · 재단법인 경남테크노파크 · 낙찰 -
- (고정형 마스터슬레이브) 고정형 Power Amp 공급 · 주식회사 엔지아커넥트 · 낙찰 -
첨부파일
뷰어 링크는 사람이 원문을 볼 때 쓰는 화면이다. 이 문서들에서 뽑은 자격 · 배점 · 일정 · 발췌는 이 페이지 아래에 글로 있다.
공고 개요
외자 · 유찰 · 국방과학연구소 · 전자부품·반도체칩
- 결과
- 유찰
- 참가
- 0곳 · 개찰 09/29(화)
요약 AI 요약
고출력 전자파장해(EMC) 시험에 사용할 고출력 전자파 증폭기 4종을 구매하는 사업이다. 1~7.5GHz 대역에서 1,000~8,000W급 출력을 내는 고체소자(Solid State) 전력증폭기를 공급하는 것이 목표다.
- RF 전력증폭기 1: 1~2.5GHz, 연속파(CW) 1,500W 이상, 7/16 DIN(f) 출력 커넥터
- RF 전력증폭기 2: 2.5~7.5GHz, 연속파(CW) 1,000W 이상, WRD250 출력 커넥터
- RF 전력증폭기 3: 1~2.5GHz, 펄스파 7,500W 피크(듀티 10%), 7/16 DIN(f) 출력 커넥터
- RF 전력증폭기 4: 2~4GHz, 펄스파 8,000W 피크(듀티 10%), 7/16 DIN(f) 출력 커넥터
- 공통 포함 옵션: 순방향/역방향 전력 샘플 포트(N-f), IEEE-488.2 GPIB 원격제어, RF 전력 표시, LAN 원격제어
- 현장 인수시험(SAT): 더미 부하를 증폭기 출력에 연결해 출력 전력이 규격서와 일치하는지 확인
평가 · 배점
협상 대상 기준 · 기술평가 점수 95점 이상은 '적격(Qualified)', 95점 미만은 '부적격(Unqualified)'으로 평가한다.
| 평가 항목 | 배점 |
|---|---|
| 증폭기 1 - 동작 주파수 | 6점 |
| 증폭기 1 - RF 출력 전력 | 6점 |
| 증폭기 1 - 증폭기 방식(TWTA 또는 SSPA) | 6점 |
| 증폭기 1 - 필수 옵션 4종 | 3점 |
| 증폭기 1 - 크기(Dimensions) | 6점 |
| 증폭기 2 - 동작 주파수 | 6점 |
| 증폭기 2 - RF 출력 전력 | 6점 |
| 증폭기 2 - 증폭기 방식(TWTA 또는 SSPA) | 6점 |
| 증폭기 2 - 필수 옵션 4종 | 3점 |
| 증폭기 2 - 크기(Dimensions) | 6점 |
| 증폭기 3 - 동작 주파수 | 7점 |
| 증폭기 3 - RF 출력 전력 | 7점 |
| 증폭기 3 - 증폭기 방식(TWTA 또는 SSPA) | 6점 |
| 증폭기 3 - 필수 옵션 4종 | 3점 |
| 증폭기 4 - 동작 주파수 | 7점 |
| 증폭기 4 - RF 출력 전력 | 7점 |
| 증폭기 4 - 증폭기 방식(TWTA 또는 SSPA) | 6점 |
| 증폭기 4 - 필수 옵션 4종 | 3점 |
| 합계(항목을 더한 값) | 100점 |
참가 자격 · 제한
- 업종제한
- 제한 없음
- 지역제한
- 제한 없음
- 공동수급
- 공동수급불허
- 입찰참가 제한
- 모름
- 실적경쟁 · PQ
- 모름
- 국제입찰
- 국제입찰
- 제출 방법
- 직찰
입찰 일정
| 진행 | 일시 | 남은 날 |
|---|---|---|
| 공고 게시 | 08/14(금) | 지남 |
| 개찰 | 09/29(화) 15:00 | 지남 |
가격
- 예정가격 방식
- 비예가
납품
- 품명
- 증폭기 (3210151401)
- 수량
- 4 EA
- 인도조건
- 모름
- 제조물품
- 모름
- 세부품명 등록
- 모름
공고 정보
- 공고종류
- 등록공고 (일반공고)
- 게시일
- 08/14(금)
- 공고번호
- R26BK01682568-000
- 참조번호
- ADD-26-014
- 공고기관
- 국방과학연구소
- 수요기관
- 국방과학연구소
- 계약방법
- 일반경쟁
- 낙찰방법
- 규격가격동시입찰
- 계약유형
- 총액계약
- 예정가격 방식
- 비예가
- 추정가격
- -
- 배정예산
- -
- 사전규격번호
- R26BD00254568
- 재공고
- 아니오
- 출처
- 나라장터
문서 발췌
과업·요구
| Project Name | Registration Date/Time | Bid Due Date/Time | Bid Place | Remark |
|---|---|---|---|---|
| High-Intensity EMC Amplifier | Sep 29th, 2026 (13:30 ~ 14:30) | Sep 29th, 2026 (15:00) | ADD Bidding Room (Industry-Education Complex, ADD, Daejeon) | Two Step Sealed Bidding |
C) ADD shall provide (Please state ‘the required documents’) for the Seller to apply for export license in a timely manner. 3. Price Terms: FCA _________ international airport (INCOTERMS 2020) 4. Shipment and Delivery A) The delivery of the commodities shall be completed within 7 months after EDC. B) The final Site Acceptance Test shall be completed within 9 months after EDC C) The shipment shall be effected by Korean flag air and/or seagoing vessel through ADD’s nominated freight forwarder. The forwarder information will be notified to the Seller by e-mail. The Seller shall notify ADD the shipping readiness of the commodity by e-mail at least thirty (30) days prior to the anticipated shipping date. The Seller shall notify ADD the shipping information by e-mail after the completion of shipment. D) Partial Shipments shall not be allowed. E) The Seller shall present correct H.S Code for commodities in the shipping documents. Commodity descriptions shall be matched with shipping documents for import customs clearance properly. F) Packing shall be made in accordance with “The Quarantine Requirements on Wood Packing Material (WMP) of Imported Consignments’ attached hereto. G) In case of goods delivered from FTA contracting countries, Seller shall submit FTA Preferential Certificate of Origin (FTA C/O) to Buyer in order to apply FTA preferential tariffs. In addition, Seller shall be responsible for any damages or any cost incurred due to defects of FTA C/O.
5. Liquidated Damage A) If the Seller fails to make shipment within the due date stipulated in the ‘Article 4. A)’, Liquidated Damage shall be charged against the Total Amount. Such liquidated damage shall be calculated at the rate of zero point zero seven five percent (0.075%) of the total contract value per day for the late shipment. B) In case the Seller fails to complete the final SAT within the due date stated above ‘Article 4. B)’, Liquidated Damage shall be charged at a rate of zero point one two five percent (0.125%) of the total contract value per day for the late completion of the final SAT. C) Total Liquidated Damage shall not exceed ten percent (10%) of the Total Contract Amount. D) If shipment and/or service is being delayed for the reasons beyond control of the Seller and such a delay affects the delivery/service schedule, the Seller shall immediately notify the Buyer of such fact with supporting evidence. In the event of such a delay, the delivery/service schedule shall be adjusted by a mutual agreement and the Liquidated damage can be exempted by mutual agreement.
6. Payment Schedule
| No. | Milestone | Value | Amount | Required Documents |
|---|---|---|---|---|
| 1 | After Shipment | 90% | Export License (if applicable) Performance Bond Certificate of Origin Commercial Invoice Shipping Documents | |
| 2 | Completion of the final SAT at end-user’s site | 10% | Commercial Invoice Implementation Certificate | |
| Total Contract Amount | 100% | |||
| ※ Note 1 - Please do not write prices in this section. Prices should only be written in the sealed price proposal. - Bidders may request to change the above payment schedule, however, the request may not be accepted for reasons not to meet ADD’s budget allocation, not to provide repayment guarantee, etc. - If any payment is needed before shipment, Seller shall issue a repayment guarantee. ※ Note 2 - In case a bidder requests advance payment, repayment guarantee for the advance payment shall be issued. The repayment guarantee can be waived only when 1) It has been agreed that this contract is of divisible nature, and 2) All the deliverables are stand-alone must have the equivalent value as the actual payment amount, and 3) Payment is made only upon delivery of each deliverable specified in the contract milestone. * If a bidder wants to have a waiver for the repayment guarantee, detailed explanation and proof that each milestone deliverable has divisible nature and equivalent value as the payment shall be provided. |
1) at the time of personal delivery, or 2) on the date of receipt of notice by registered mail, or 3) on the date of e-mail receipt 8. Warranty The contractor must warrant the system at least 1 year since the date of final site acceptance test completion. 9. If there’s any discrepancies between the terms or any differences in the meaning of the terms of this Contract, Section II special terms & Conditions shall have the highest precedence. 10. No alteration, modification or change of material terms of this Contract after the effective date of contract including, but not limited to the terms of shipment, payment, warranty, liquidated damage, commodity to be provided, and service to be provided shall be valid without written amendment of contract signed by the Buyer and the Seller.
| H.S.NO. | Item No. | DESCRIPTION(SPECIFICATION) | QTY/UNIT | UNIT/ PRICE | AMOUNT |
|---|---|---|---|---|---|
| e.g.) RF Power Amplifier | 1/SET |
* Note • Total price must be breakdown according to item by item • The above service description is bidding reference. The bidder may suggest its own item name in the bid. However, the bidder should suggest more detailed service description by taking account of above service description. (For more detail, please refer to Section IV.) Section Ⅳ. Requirements for Technical Proposal Request for Proposal High-Intensity EMC Amplifier August, 2026 The 6th R&D Institute 2nd Directorate Agency for Defense Development 1. Technical Specifications The equipment shall meet or exceed the specifications set forth in the table below.
| No. | DESCRIPTION | SPECIFICATION | Quantity |
|---|---|---|---|
| 1.1 | RF Power Amplifier 1 | ○ Solid State Power Amplifier(CW) ○ Frequency range: 1 GHz - 2.5 GHz ○ Output Power(Pn min): 1,500 W ○ RF Output: 7/16 DIN(f) ○ Mains Supply: 3x 400 V AC ±10%, 47 ... 63 Hz ○ Dimensions(H, D): 17HU(19” Rack), 800 mm Max ○ Included Options: - RF-Sample Ports: Forward Power Port(N-f), Reverse Power Port(N-f) - IEEE-488.2 GPIB Remote Control - RF Power Indication - LAN Remote Control | 1 EA |
| 1.2 | RF Power Amplifier 2 | ○ Solid State Power Amplifier(CW) ○ Frequency range: 2.5 GHz - 7.5 GHz ○ Output Power(Pn min): 1,000 W ○ RF Output: WRD250 ○ Mains Supply: 3x 400 V AC ±10%, 47 ... 63 Hz ○ Dimensions(H, D): 24HU(19” Rack), 800 mm Max ○ Included Options: - RF-Sample Ports: Forward Power Port(N-f), Reverse Power Port(N-f) - IEEE-488.2 GPIB Remote Control - RF Power Indication - LAN Remote Control | |
| 1.3 | RF Power Amplifier 3 | ○ Solid State Pulsed Power Amplifier ○ Frequency range: 1 GHz - 2.5 GHz ○ Output Power(Pp min / Duty): 7,500 W pk / 10 % ○ RF Output: 7/16 DIN(f) ○ Mains Supply: 3x 400 V AC ±10%, 47 ... 63 Hz ○ Included Options: - RF-Sample Ports: Forward Power Port(N-f), Reverse Power Port(N-f) - IEEE-488.2 GPIB Remote Control - RF Power Indication - LAN Remote Control | |
| 1.4 | RF Power Amplifier 4 | ○ Solid State Pulsed Power Amplifier ○ Frequency range: 2 GHz - 4 GHz ○ Output Power(Pp min / Duty): 8,000 W pk / 10 % ○ RF Output: 7/16 DIN(f) ○ Mains Supply: 3x 400 V AC ±10%, 47 ... 63 Hz ○ Included Options: - RF-Sample Ports: Forward Power Port(N-f), Reverse Power Port(N-f) - IEEE-488.2 GPIB Remote Control - RF Power Indication - LAN Remote Control |
2. Payment Payment will be made 90% after shipment and 10% after completion of the final SAT(Site Acceptance Test). 3. Delivery Within 7 months after the contract date(provided that, in the case of items subject to export control, within 7 months after export license approval). 4. Site Acceptance Test(SAT) For the SAT, the evaluation shall be conducted by connecting a dummy load to the amplifier output to verify that the Output Power value conforms to the datasheet specifications.
| No. | DESCRIPTION | SPECIFICATION |
|---|---|---|
| 4.1 | RF Power Amplifier 1 | ○ Output Power(Pn min): 1,500 W |
| 4.2 | RF Power Amplifier 2 | ○ Output Power(Pn min): 1,000 W |
| 4.3 | RF Power Amplifier 3 | ○ Output Power(Pp min): 7,500 W pk |
| 4.4 | RF Power Amplifier 4 | ○ Output Power(Pp min): 8,000 W pk |
5. Warranty The Seller guarantees that the Commodity supplied under this contract shall be free from any defects in materials or workmanship and conforms to the requirements of the contract. This guarantee shall continue until One(1) year warranty from final site acceptance test(SAT) by ADD’s end-user team. 6. Technical Evaluation Criteria The following technical evaluation criteria apply when there are one(1) or more bidders. A score of 95 or above will be graded as ‘Qualified’, while a score below 95 will be graded as ‘Unqualified’.
배점·평가
| NO. | Evaluation Criteria (Meet of Exceed: Max Score, Below Spec: 0 Score) | Score | |
|---|---|---|---|
| Amplifier #1 | Operation Frequency | 6 | 27 |
| RF Output Power | |||
| Amplifier Type(TWTA or SSPA) | |||
| 4 Required Options | 3 | ||
| Dimensions | 6 | ||
| Amplifier #2 | Operation Frequency | 27 | |
| RF Output Power | |||
| Amplifier Type(TWTA or SSPA) | |||
| 4 Required Options | 3 | ||
| Dimensions | 6 | ||
| Amplifier #3 | Operation Frequency | 7 | 23 |
| RF Output Power | |||
| Amplifier Type(TWTA or SSPA) | 6 | ||
| 4 Required Options | 3 | ||
| Amplifier #4 | Operation Frequency | 7 | |
| RF Output Power | |||
| Amplifier Type(TWTA or SSPA) | 6 | ||
| 4 Required Options | 3 | ||
| Total Score | 100 |